Substrate hydration calculator
Hydrating a substrate means adding enough water to bring sawdust, pellets or straw to a target moisture, usually about field capacity. Enter what the substrate weighs before you wet it, the water it already holds and your target, and the calculator gives the water to add and the total wet weight.
Substrate hydration calculator
Sawdust, pellets, straw or a mix, weighed as it comes from the bag or bale.
UC's dry ingredients held 0.4 lb of water in 2.05 lb, about 20%. Dry a sample to know yours.
Field capacity: about 60–65% for sawdust and straw. GroCycle hydrates Master's Mix to 60%.
Water to add
2.05 lb
- That's 930 g, or 930 mL: 1 g of water is 1 mL.
- Total wet weight: 4.1 lb (1,860 g)
- Dry matter: 2.05 lb × (1 − 20%) = 1.64 lb
- Wet weight: 1.64 lb ÷ (1 − 60%) = 4.1 lb
Nothing you type here leaves your browser.
How does the substrate hydration calculator work?
- Water to add = dry matter ÷ (1 − target moisture) − weight before wetting
- Dry matter = weight before wetting × (1 − moisture it already holds)
- 1 g of water = 1 mL
For example: A UC Cooperative Extension handout's worked 5-lb block starts from 2.05 lb of dry ingredients that still hold 0.4 lb of water, about 20%. That leaves 2.05 × (1 − 0.2) = 1.64 lb of dry matter. At 60% moisture the batch should weigh 1.64 ÷ (1 − 0.6) = 4.1 lb, so add 4.1 − 2.05 = 2.05 lb of water, about 930 g or 930 mL.
- Moisture is the water's share of the total wet weight, the way extension recipes state it. At 60%, a batch is 60 parts water to 40 parts dry matter, so each pound of dry matter carries 1.5 lb of water in all.
- UC takes the same 2.05 lb of ingredients, 1.65 lb of it dry matter, to a 5-lb block: 1.65 ÷ 5 is 33% dry matter, or 67% water. Enter 2.05 lb, 19.5% and 67%, and the calculator gives the 2.95 lb of water that makes up the difference.
- The weights get you close; the squeeze test has the last word. A light squeeze should give no water and a hard one only a few drops. Too wet, mix in more dry substrate; too dry, add a little water and test again.
- To find the water your substrate already holds, dry a sample: our biological efficiency guide gives a microwave method.
Where do the numbers come from?
Every formula and figure on this page is from one of our grower guides, which cite their sources: extension services, farm trials and published studies.
- Field capacity: How wet a substrate should be, and the squeeze test.
- Master's Mix: GroCycle's recipe, water included.
- Biological efficiency by species: UC's worked block, and how to dry a sample.
Common questions
How wet should mushroom substrate be?
Published recipes for sawdust and straw aim for about 60–65% water, which is roughly field capacity. A UC Cooperative Extension handout gives Stamets' enriched sawdust recipe at 60–65% and expects pasteurized straw, drained well, to hold about 65%. GroCycle hydrates Master's Mix to 60% and gives 50–70% for substrates in general.
What is field capacity?
Field capacity is the most water a substrate can hold without free water pooling or dripping out of it. GroCycle's squeeze test: at field capacity a light squeeze gives no water, and a hard squeeze gives only a few drops.
How much water does Master's Mix need?
GroCycle's recipe for one 5-lb block is 1 lb of hardwood sawdust, 1 lb of soybean hulls and 1.4 liters of water, for about 60% moisture. By the formula on this page, 2 lb of bone-dry ingredients at 60% take about 1.36 L, so pellets that hold some water of their own need a little less than GroCycle's 1.4 L.
What happens if substrate is too wet?
It colonizes slowly. GroCycle names overhydrated substrate as the most common cause of slow colonization, and excess moisture helps bacteria grow. If a light squeeze gives more than a drop or two, mix in some dry substrate.
Where does Hypha come in?
Hypha doesn't work out hydration. It keeps your substrate recipes with your supplies in its inventory, so the batch that hit field capacity is easy to repeat, and a block's notes can hold the water you added.
Get Hypha freeFree forever · 60 days of Pro included · No credit card · iOS, Android & web
More calculators
- Biological efficiency calculator → BE% from your harvest and your block's dry or wet weight.
- Spawn rate calculator → Spawn for a block or a batch, and what a bag of spawn covers.
- Cost per pound calculator → What a fresh pound costs you, with lost blocks and overhead.
- Martha tent calculator → Tent size, humidifier output and running cost.
- All calculators → Every free tool for mushroom growers.
- Growing conditions chart → Temperature, humidity and CO2 for 14 species.